Turns if One End of the Pool has Steps

I'm considering moving to a building that has a pool. It's a beautiful pool, but  has steps at one end instead of a wall.   It doesn't seem to me like a flip turn will work at all and even an open turn would be awkward on the steps.  Anyone dealt with this issue?

Parents
  • Several questions. Are you talking about a full size 25y/m competition pool that has steps in the shallow end? They go all the way across the width of the pool? Or, is this an apartment complex pool? Are flip turns absolutely necessary? If it’s in a small apartment complex pool, and you’re just doing straight continuous lap swimming…as opposed to sets and intervals…you might consider stationary swimming on a static line. — Dan

  • Thanks for your response. It's actually 169 feet long, about two lanes, constant depth of about 4 feet, and steps across one end. I could do flip turns at one end but not the step end.

  • Actually, 169 feet is 51.5 meters long. Is the pool missing a moveable bulkhead? As mentioned by Dan, there are portable swim walls that can divide up the lane so you can turn against a "solid" surface. These really range in price from $ hundreds to $$$ thousands. The ones that are typically used by swim teams are the Turnmaster Swim Wall Pro by FINIS (these are not really cheap!).

    If you are going to swim laps, you can flip before you reach the stairs since the pool is deep enough. As there is nothing to push off from, this gives a good core and body position workout. And then flip on the wall side as usual. This also gives good training for open water swimming - to turn before the walls and not push off from the bottom. I am guessing that 50 meters might be just before the stairs, so you could track your mileage and "estimated times" during your swims.

    Good luck!

    Robin

Reply
  • Actually, 169 feet is 51.5 meters long. Is the pool missing a moveable bulkhead? As mentioned by Dan, there are portable swim walls that can divide up the lane so you can turn against a "solid" surface. These really range in price from $ hundreds to $$$ thousands. The ones that are typically used by swim teams are the Turnmaster Swim Wall Pro by FINIS (these are not really cheap!).

    If you are going to swim laps, you can flip before you reach the stairs since the pool is deep enough. As there is nothing to push off from, this gives a good core and body position workout. And then flip on the wall side as usual. This also gives good training for open water swimming - to turn before the walls and not push off from the bottom. I am guessing that 50 meters might be just before the stairs, so you could track your mileage and "estimated times" during your swims.

    Good luck!

    Robin

Children
  • I’d think that a movable bulkhead would indicate that it’s a competition pool meant for swimming laps (or at least was originally). And consequently wouldn’t have steps across one end. But you are right that the end of the steps  would be right about at the 50m point. Still, I’d think something could be created to set in the water, right at the steps, to function as a temporary wall. But personally, with the pool management’s permission, I think I would try for something inexpensive like this graphic I made.  Tell them it’s for community use, and maybe they’d let you store it right there at the pool. With a few 2x4s and some plywood, I’d make a matching section of steps, with the same dimensions at the steps in the pool, about 3’ or 4’ wide. Then flip it upside down in the pool and the existing steps would hold it in place. Might require a weight to keep it from floating.