Myth #3: The reason one should rotate the body along the long axis in freestyle is to reduce drag.
Please don't tell me this is not a myth. I hear this from beginner coaches all the way to some of America's top swimming coaches. Rotating the body is very important....so is reducing drag. I just don't think we do it for that reason. If we did, kicking on our side would be faster, whether underwater or on the surface, than kicking on our stomach...and there is not much difference in speed either way. Besides that, we really spend very little time on our sides in freestyle. Most of it is in transition from one side to the other and closer to horizontal than vertical. Finishing a freestyle race in a pool on our side is also important...because we can extend our reach further..not reduce drag.
So if body rotation is not about drag reduction, why do we do it? Two reasons. The first is to gain more power. By rotating, we put our arm into a mechanically better position of strength, engaging much bigger muscles in our back and core to help with the pulling. The second reason has to do with the counter-rotation. When we enter our right hand in the water, for example, our body is rotating to the left. At the very moment we begin our catch, the body has stopped rotating left and initiates the counter-rotation back to the right. We call this point the connection (between arm and core/hips). This counter rotation creates a stabilizing force that gives us something to pull against. Remember, it is you and the water molecules out there...no walls, starting blocks or pitching mounds to push off or pull against. So we create our own stabilizing force out of the rotational motion of our own body. The faster and longer the counter-rotational turn, the greater the stabilizing force and the better distance per stroke (dps) we can achieve. This is one advantage the hip/leg driven swimmers have over the high stroke rate swimmers...holding in front longer gives them more time to rotate/counter-rotate the hips. But before you all go rushing back to that technique, if you don't have the legs driving you, even that extra dps cannot overcome the inertia problem. You are still swimming 'stop-and-go' freestyle..not as efficient as the high stroke rate.
Most swimmers I teach swim very flat...like a surfboard that grew arms and legs. That would be ok if we had the buoyancy and drag coefficient of a surfboard, but we don't. We are bricks and to move a brick through the water, we need the added power that the body rotation gives us. BTW, this is why wetsuits enable one to get away with swimming flatter.
Can you use good body rotation with a high stroke rate? Yes...but it takes work. The body rotation doesn't just happen. You make it happen...but because there is less time, it becomes more oriented from the shoulder and less from the hip which takes longer to turn (although hip motion is still important). Thus the name shoulder-driven freestyle.
Gary Sr.
Parents
Former Member
I've certainly talked to far fewer coaches than Gary, but mostly I hear this statement as an aside or beneficial side-effect to rotation, rather than the primary reason to rotate. From the post it sounds like Gary might be positing that there is no reduction in drag from rotating, though. I don't know if it is true or not but I don't much care, either, since it isn't the main reason to rotate.
The first reason is a no-brainer, but I don't hear the 2nd reason given very often (or, if I do, not in this fashion). Clearly as the body rotates one way and then the other, there is a change in angular momentum; it sounds a little like Gary is saying that during this time, some of this rotation (angular momentum) essentially gets translated into forward motion (linear momentum). Physics-types, help me out: does that sound right/reasonable? I guess I don't see why not...it happens every time I use a screwdriver...
As far as the rotation giving "something to pull against"...it is hard here, sitting at a desk rather than in the water, to recreate exactly what happens, but I wonder if the rotation is initiated/changed by the pull as much as the core/legs. Maybe it might just as well "something to kick against?" It is all connected at that point, as Gary says...just thinking out loud...
For me, the second reason is also a no-brainer. And btw, I don't think I have ever read such a nice explanation as that provided by Gary. Stabilizing force, something to pull against. I believe in this very hard in fact. That's because I clearly feel it. Maglischo doesn't though. And quite clearly.
Do you remembers in your early days having played doing this in the water?
YouTube- Demonstrating Body Rotation (please turn off the volume, sorry about that)
On this clip, I aimed at the cleanest possible rotation, I didn't have time to practice before etc... I can assure you that I can accelerate body rotation without the arms without the legs up to speed that probably excess 2 rotation per second (120 per minute), and I am sure you can do it too. I used to do this stuff a lot when I was young.
Body rotation remains the same no matter the kicking pattern. Body rotation remains the same even during pull band sets. For me, it's the center of the stroke, just like dolphin undulation is at the core of the fly stroke.
What is making all this theoretically possible is that we don't rotate along a perfectly straight frontal axis. This axis is somehow disrupted by lateral torsion. I couldn't be spinning without the arms without the legs at 120 spins per minute without breaking this perfectly straight axis. That's why it works in my opinion.
I've certainly talked to far fewer coaches than Gary, but mostly I hear this statement as an aside or beneficial side-effect to rotation, rather than the primary reason to rotate. From the post it sounds like Gary might be positing that there is no reduction in drag from rotating, though. I don't know if it is true or not but I don't much care, either, since it isn't the main reason to rotate.
The first reason is a no-brainer, but I don't hear the 2nd reason given very often (or, if I do, not in this fashion). Clearly as the body rotates one way and then the other, there is a change in angular momentum; it sounds a little like Gary is saying that during this time, some of this rotation (angular momentum) essentially gets translated into forward motion (linear momentum). Physics-types, help me out: does that sound right/reasonable? I guess I don't see why not...it happens every time I use a screwdriver...
As far as the rotation giving "something to pull against"...it is hard here, sitting at a desk rather than in the water, to recreate exactly what happens, but I wonder if the rotation is initiated/changed by the pull as much as the core/legs. Maybe it might just as well "something to kick against?" It is all connected at that point, as Gary says...just thinking out loud...
For me, the second reason is also a no-brainer. And btw, I don't think I have ever read such a nice explanation as that provided by Gary. Stabilizing force, something to pull against. I believe in this very hard in fact. That's because I clearly feel it. Maglischo doesn't though. And quite clearly.
Do you remembers in your early days having played doing this in the water?
YouTube- Demonstrating Body Rotation (please turn off the volume, sorry about that)
On this clip, I aimed at the cleanest possible rotation, I didn't have time to practice before etc... I can assure you that I can accelerate body rotation without the arms without the legs up to speed that probably excess 2 rotation per second (120 per minute), and I am sure you can do it too. I used to do this stuff a lot when I was young.
Body rotation remains the same no matter the kicking pattern. Body rotation remains the same even during pull band sets. For me, it's the center of the stroke, just like dolphin undulation is at the core of the fly stroke.
What is making all this theoretically possible is that we don't rotate along a perfectly straight frontal axis. This axis is somehow disrupted by lateral torsion. I couldn't be spinning without the arms without the legs at 120 spins per minute without breaking this perfectly straight axis. That's why it works in my opinion.