Japanese swimsuit makers race Speedo
May 13, 2008
TOKYO (AFP) — A Japanese fabric maker says it has the secret to make the world's fastest-ever swimsuit as the country races against time to catch Speedo's high-tech, record-breaking LZR Racer suit.
Japan's Olympic swimmers, obliged to wear their own country's products, have been in uproar over the LZR Racer, going as far as to liken its use to doping because of the advantage it gives wearers.
Now Japan's Yamamoto Corp., which has supplied a super-fast synthetic rubber fabric to wetsuit makers around the world, has come to the rescue with the Olympic Games just three months away.
The company has offered material, called the Biorubber Swim-SCS Fabric, to challenge Britain's Speedo, saying it is the "the world's fastest swimwear material."
"The decision is not aimed at all at business. It's aimed at helping Japanese swimmers fight to their heart's content in fair conditions at the Beijing Olympics," said the company's president, Tomizo Yamamoto.
The rubber maker said it has sent samples to Japan's three main sporting attire makers -- Mizuno, Asics and Descente. The Japan Swimming Federation has given the three until May 30 to come up with an upgrade to counter Speedo.
The federation requires its swimmers, who include Olympic breaststroke champion Kosuke Kitajima, only to wear products by one of the three companies.
Yamamoto's fabric is coated with synthetic rubber that absorbs water molecules into its honeycomb surface, unlike most other materials which repel them. Its surface is smoothed out with water molecules to minimise frictional resistance.
Japan has set a goal of winning a total of five medals at the Olympics in August across all disciplines, including in the pool.
But Japanese swimmers have been alarmed by the LZR Racer since its debut in February, with the suit accounting for 18 of the 19 new world records since then.
"We want to erase fears among the swimmers. We have requested the three companies to match Speedo," said Kazuo Sano, the swimming federation's executive director.
Tomiaki Fukuda, chief of the Japanese delegation to the Beijing Games, lashed out at other sports leaders for limiting the choice to Japanese brands.
"Why can't we use the (Speedo) swimsuit when we know it's fast," Fukuda shouted at a recent meeting, according to media reports.
Yamamoto said its Biorubber fabric has already been used, primarily for triathlon events.
In October, swimwear by New Zealand brand Blue Seventy which used the fabric was approved by the international swimming federation FINA for its official meets, he said.
Other suit makers, including Xterra of the United States, Australia's 2XU, Aquaman of France and New Zealand's Orca have also adopted the material, Yamamoto said.
Five collegiate swimmers at Japan's Kansai University shaved their times by 1.0-2.0 seconds in 50 metres after switching to the Biorubber Swim fabric, he said.
The LZR Racer was developed with the help of the US space agency NASA. It uses a high-tech fabric of water-resistant polyurethane and is structured to squeeze the swimmer's body into the right posture.
FINA endorsed its use last month.
When Japanese Olympic swimmers tested the LRZ Racer last month, one of them improved his time for the first 15 metres by 0.7 seconds, said swimming federation official Norimasa Hirai.
"I can imagine that in general the (Speedo) product means a difference of 0.5 seconds over 100 metres and one second over 200 metres," Hirai said.
All three Japanese makers said they would consider the Yamamoto fabric.
"Yamamoto's is one of our options," said Mizuno spokesman Fumihiko Sawai. "We are definitely prepared to produce the best available."
afp.google.com/.../ALeqM5hrB4kmt3vQdqOoix9oNkEW0AoR2Q
Parents
Former Member
Since we’re back on the topic of suits again, here’s another analysis: Is it really the suit -or the water itself- that makes the difference in swimming speed?
Here’s a scientific analysis “The Physical Properties of Water” which provides an explanation aquatic hydrodynamics and the subject of “drag”: :fish2:
www.marietta.edu/.../water_physics.htm
While not expressly dealing with the hydrodynamic aspects of human swimming or the methods of increasing swimming capabilities, there is a discussion of the subject of “drag” near the end of the article (you need to scroll down to the bottom of the page).
In general, this analysis largely dispels the idea that tech suits are more effective in reducing surface drag of the human body any more than swimming with just bare skin. :agree:
This is also a discussion of the subject of surfactants which greatly reduce water friction by breaking surface tension and reducing viscosity:
en.wikipedia.org/.../Surfactant
I personally know from experiments that surfactants (a substance commonly used in bath gels and shampoos) are very effective in increasing the efficiency of pumps and motors (decreased motor amperage) used in jetted baths and hot tubs. Adding a tablespoon of a good bath gel for every 30 gallons of water can actually reduce the viscosity of the water so much that the pump motor’s amperage will drop by 12% to 13%.
Therefore, they are a also a good candiate for enhancing swimming capabilities. However, surfactants may not be suitable for swimming pools where persons are subject to complete submersion and inhaling or swallowing water is common.
Never the less, if a sheer increase in speed is the only objective of the swimming community, the best approach would be to develop a “swimmer friendly” surfactant rather than to keep focusing on the development of supposedly faster (and very uncomfortable) suits. :agree:
Of course the suit makers won’t be able to rake in the big $$$ and the brand recognition they’re getting from the suit technology craze!!! :cry:
Happy swimming
Dolphin 2
Since we’re back on the topic of suits again, here’s another analysis: Is it really the suit -or the water itself- that makes the difference in swimming speed?
Here’s a scientific analysis “The Physical Properties of Water” which provides an explanation aquatic hydrodynamics and the subject of “drag”: :fish2:
www.marietta.edu/.../water_physics.htm
While not expressly dealing with the hydrodynamic aspects of human swimming or the methods of increasing swimming capabilities, there is a discussion of the subject of “drag” near the end of the article (you need to scroll down to the bottom of the page).
In general, this analysis largely dispels the idea that tech suits are more effective in reducing surface drag of the human body any more than swimming with just bare skin. :agree:
This is also a discussion of the subject of surfactants which greatly reduce water friction by breaking surface tension and reducing viscosity:
en.wikipedia.org/.../Surfactant
I personally know from experiments that surfactants (a substance commonly used in bath gels and shampoos) are very effective in increasing the efficiency of pumps and motors (decreased motor amperage) used in jetted baths and hot tubs. Adding a tablespoon of a good bath gel for every 30 gallons of water can actually reduce the viscosity of the water so much that the pump motor’s amperage will drop by 12% to 13%.
Therefore, they are a also a good candiate for enhancing swimming capabilities. However, surfactants may not be suitable for swimming pools where persons are subject to complete submersion and inhaling or swallowing water is common.
Never the less, if a sheer increase in speed is the only objective of the swimming community, the best approach would be to develop a “swimmer friendly” surfactant rather than to keep focusing on the development of supposedly faster (and very uncomfortable) suits. :agree:
Of course the suit makers won’t be able to rake in the big $$$ and the brand recognition they’re getting from the suit technology craze!!! :cry:
Happy swimming
Dolphin 2
