Hello,
I am relatively new to swimming and have been getting into triathlons. I have been starting build up my endurance and working on longer swims. Once I start to get about 25-30 min in, I begin to get lots of pressure on my goggles to the point where I have to stop and re-adjust them.
Being new to swimming, I don't know if this is common, if this is a user error, or a problem with the goggles I have.
If anyone can shed some light on what might be going on that would be fantastic.
Thanks!
It's common to newbies, so don't worry. I suspect you just have them tightened too far down. Try loosening them to the point where they leak, then a slight tighten up to seal it. You can do this by just dunking your head under the water to see if they leak before you go swim.
It's common to newbies, so don't worry. I suspect you just have them tightened too far down. Try loosening them to the point where they leak, then a slight tighten up to seal it. You can do this by just dunking your head under the water to see if they leak before you go swim.
