Hello, I'm new to swimming properly. I messed around with a poor breaststroke from childhood until October last year, when I decided to start learning front crawl. I've done quite a bit of snorkelling, so when I committed to learning to swim correctly, I favoured a mid-size swimming mask instead of goggles...I just found this more comfortable and I never had fogging issues that a good dose of saliva wouldn't fix.
A few weeks ago, I decided to try the Arena Pure goggles for a change. They are supposed to have an anti-fog coating, which should never be touched by hand etc etc. On their maiden outing, I just couldn't get comfortable with them and I thought they were fogging up, so I employed the primitive method (rub saliva into the lenses with finger). You may well slap your foreheads at the stupidity of this, but I felt I had to try. The result was a smudge at the centre of the lenses.
When I got home, after rinsing in fresh water, I decided to wipe the interior with a soft microfibre cloth. The result is that the centre of the lenses appears scuffed and visibility is reduced. I don't think the lenses truly are scuffed, unless the lense material is absurdly soft. Yesterday, I applied some Cressi Anti-fog in the hope that the layer may recover and the interior return to its original condition, but it didn't work. The lenses look as if someone has rotated a scouring pad on them.
I guess I should remove the remainder of the original anti-fog layer and just reapply the Cressi solution, but I'm not sure how to remove the original layer without damaging the lenses.... Can anyone please advise?
Many thanks in advance
Remove the remaining coating with toothpaste and then do the baby shampoo as recommended.
A few months ago I tried to polish the surface of an old pair of goggles using tooth paste as an experiment. It did not work. The goggles came out cloudy. Some tooth pastes may work for this but the brand I used left find scratches.
Remove the remaining coating with toothpaste and then do the baby shampoo as recommended.
A few months ago I tried to polish the surface of an old pair of goggles using tooth paste as an experiment. It did not work. The goggles came out cloudy. Some tooth pastes may work for this but the brand I used left find scratches.